The catalogue
29 products across five departments. Each one lists the working days it spends at the bench and the materials it can be made from. Your rates are quoted to your account in writing when it opens, on the published volume ladder — a product our bench has not yet quoted says so here rather than carrying a figure nobody has agreed to. Turnaround figures are indicative laboratory days, agreed per category with our laboratory as each schedule is confirmed, and they exclude transit; the two numbers are quoted separately, always.
01 · 9 products
Monolithic and layered ceramics, pressed lithium disilicate, metal-ceramic and full-cast work. The volume core of the laboratory, and where our margin discipline shows.
From 5 working days at the bench
Full-contour multilayer zirconia, milled and sintered on one bench from one blank. The default posterior unit — no porcelain to chip because there is no porcelain.
Available in
A zirconia core cut back and hand-layered with feldspathic ceramic for anterior work where a monolithic unit reads flat.
Available in
IPS e.max, pressed or milled. Still the reference standard for a single anterior unit bonded to prepared enamel.
Available in
Pressed or refractory-die feldspathic veneers, delivered as a matched set with a try-in protocol and a stump-shade map.
Available in
Partial-coverage ceramic and hybrid-ceramic restorations where a full crown would remove sound tooth structure.
Available in
Three units to full arch in 3Y or gradient zirconia, with connector cross-sections designed to span, not to hope.
Available in
Non-precious, noble and high-noble substructures with hand-applied ceramic. Still the right answer for certain long-span and cement-retained cases.
Available in
Gold and non-precious full-cast units for heavy function and minimal occlusal clearance.
Available in
PMMA provisionals milled from the definitive design, so the temporary and the final share one geometry.
Available in
02 · 6 products
Custom abutments milled from titanium, screw-retained restorations, bars and full-arch fixed prostheses, verified against the manufacturer's own implant library. The department is opening: each product shows its own availability below, and the bench is quoting them now.
Milled titanium or zirconia-on-titanium-base abutments with emergence profiles designed from the soft-tissue scan, not guessed.
Available in
Single-unit screw-retained restorations on a titanium base, with the access channel placed where the occlusion allows it.
Available in
Multi-unit implant bridges, screw- or cement-retained, verified on a printed model with a passive-fit check before finishing.
Available in
Monolithic zirconia or titanium-bar hybrid full-arch restorations, staged through prototype, verification jig and definitive delivery.
Available in
Titanium and cobalt-chrome bars for overdentures, milled from a single blank with attachment housings positioned to the design.
Available in
Tooth-, tissue- and bone-supported guides printed in a Class I biocompatible resin, with a treatment plan returned for your approval first.
Available in
03 · 6 products
Digitally designed and conventionally finished. Cast cobalt-chrome frameworks, flexible and milled partials, and complete dentures set to a recorded occlusion.
From 8 working days at the bench
Conventional and fully digital complete dentures, processed in high-impact base resin with a recorded, not assumed, occlusal scheme.
Available in
Milled or printed from a bonded disc so the base and teeth are one body — reproducible, and re-printable from the same file if it is lost.
Available in
Cobalt-chrome frameworks designed on the digital model with rests, guide planes and reciprocation drawn before a single clasp is cast.
Available in
Thermoplastic nylon partials for aesthetic clasping in the anterior, with metal-free retention.
Available in
Attachment-retained overdentures, from two-implant locator cases to bar-supported full arches.
Available in
Chairside-to-lab turnarounds on relines, rebases, tooth additions and fractures.
Available in
04 · 4 products
Occlusal guards, splints and retainers — the quiet, high-repeat work that keeps a practice's hygiene column full.
From 3 working days at the bench
Hard, dual-laminate and soft guards, printed or pressed, adjusted to a recorded centric relation rather than to maximum intercuspation by default.
Available in
Michigan, anterior deprogrammer and repositioning splints, built to a prescribed vertical dimension.
Available in
Doctor-directed aligner sequences with a staged treatment plan returned for approval before a single tray is printed.
Available in
Clear vacuum-formed, Hawley and fixed lingual retainers, supplied in matched sets.
Available in
05 · 4 products
Design-only files, printed models, diagnostic wax-ups and smile design. Take our design and mill it yourself, or let us finish it.
From 1 working day at the bench
We design, you mill. A finished, nested restoration file returned in your CAM format, usually inside a working day.
Digital deliverable
Returned as a file in your CAM format — no physical material is consumed at the bench.
Solid and die-sectioned models printed to a validated accuracy protocol, with articulator mounting on request.
Available in
Digital wax-ups returned as a render, a printed model and a matrix, so the case is sold before it is prepped.
Available in
Facially driven design from photographs and scan data, delivered as a patient-facing presentation and a trial smile.
Available in
Intake
.stl
Universal open mesh — every scanner exports it
.ply
Open mesh with colour and texture data
.obj
Open mesh, commonly paired with a texture map
.dcm
3Shape native, carries margin lines and metadata
.zip
Full case export from any scanner portal
.3oxz
3Shape case archive
.dxd
exocad project
We are a fully digital laboratory. Impressions and stone models are not accepted — a case needs a scan attached before it can start.
Next